Tekonsha

• Four copper wires with braided nylon insulation protection
• Four-pin connectors, one end fits Tekonsha controllers
• Wire colors: black, red, blue, white
• Weighs 0.3 lbs, custom length reduces strain

Tekonsha

Tekonsha Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends 302600

Tekonsha

Tekonsha Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends 302500

• Four copper wires with braided nylon insulation
• Two four-pin Plug & Play connectors
• No cutting, splicing, or taping required
• Weighs 0.305 lbs
• Works with any Tekonsha brake controller

Tekonsha

Tekonsha Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends 301400

• Two four-pin square female connectors, plug-and-play design
• No cutting, splicing, or taping required for installation
• 0.345 lbs, custom length harness reduces wire strain

Tekonsha

Tekonsha Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends 302300

• 12-volt 5 amp/hour sealed lead acid battery
• Weighs 3.3 lbs, 2.8 inches long
• For electric brake breakaway systems on trailers
• Works with single, tandem, and tri-axle trailers
• Requires periodic recharging for optimal performance

Tekonsha

Tekonsha Breakaway Battery, 12 Volt 5 Amp/Hr Sealed Lead Acid Battery for Shur-Set III

Tekonsha

Tekonsha Trailer Brake Controller Custom Harness, Vehicle & Brake Control Ends 308100

• Universal fit, compatible with vehicle-specific brake controllers
• Supports multi-axle trailers up to 4 axles
• OEM-compatible connectors for standard installation
• Requires factory or aftermarket brake controller unit

Tekonsha

Tekonsha WIRING KIT FOR BRAKE CONTROL W/3-4 TRAILER AXLES

• 4-way flat connector design with 12-inch wire length
• 16 gauge wire for standard trailer lighting circuits
• Includes dust cover for connector protection
• DIY installation without factory T-One connector
• Test light included on select model variants

Tekonsha

Tekonsha Wiring Connector, 4-Way Flat Vehicle End, 12 in. Length Wire

Tekonsha

Tekonsha Prodigy P2 Proportional Brake Controller for Trailers with 1-4 Axles, Gray

Tekonsha

Tekonsha 30235-P Brake Control Converter & 7-Way Adapter Kit for RAM Fits select: 2013-2021 RAM 1500, 2013-2020 RAM 2500

• California compliant for brake control regulations
• Includes 3023 trailer brake control unit
• Universal fit for RV and trailer brake systems

Tekonsha

Tekonsha 30234-P 2-Plug RV Trailer Brake Control Wiring Adapter with Converter & 7-Way Adapter Kit for RAM

• No cutting or splicing required, plug-and-play installation
• Weather-proof construction with brown, green, yellow, white wires
• 0.5 lbs, includes all necessary hardware for install
• Male-female terminal configuration, 2-wire electrical system

Tekonsha

2006-2013 Chevrolet Impala Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118417

• Stop/turn capacity 2.1 amps, taillight capacity 4.2 amps
• Weather-proof construction, brown/green/yellow/white wire colors
• 1 lb weight, includes all hardware, 1-year warranty

Tekonsha

2006-2009 Ford Fusion, 2010-2012 Ford Fusion, 2011-2013 Ford Fiesta Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118422

• Stop/turn capacity 2.1 amps, taillight capacity 5 amps
• Circuit protected with weather-proof construction
• Plug & Play installation behind taillight, vehicle-specific design
• Weighs 1.05 lbs, includes hardware

Tekonsha

2007-2012 Hyundai Santa Fe, 2010-2013 KIA Forte Tekonsha Plug & Play T-Connector Adapter Trailer Wiring 118415

• 1.990 inch diameter steel grease cap
• Two caps per package
• Steel construction with silver finish
• 0.22 lbs total weight
• No grease fitting included

Tekonsha

Tekonsha Trailer Wheel Bearing Grease Cap, 1.990 in. Diameter