Fulton Trailer Winch, Single-Speed, 900 lbs. Capacity, StrapFultonOriginal price was $62.50. Current price is $52.30.Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Fulton
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Original price was $56.25. Current price is $47.37.You save $8.88 (16%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Fulton single speed winches are designed to meet your toughest pulling demands. Featuring solid drum gear construction, factory-lubricated drive systems, and industry-leading Z-MAX 600 high performance zinc finish.
| BRAND: | FULTON |
| PART NUMBER: | 142001 |
| WARRANTY: | LIMITED 5 YEAR WARRANTY |
| WEIGHT: | 5.5 LBS |
| CAPACITY: | 900 LBS. |
| UNIVERSAL OR SPECIFIC FIT: | UNIVERSAL |
| MAXIMUM LENGTH: | 4.96 IN. |
| MAXIMUM WIDTH: | 3.63 IN. |
| MAXIMUM HEIGHT: | 4.2 IN. |
| TYPE: | SINGLE SPEED |
| WATERPROOF: | YES |
| HOOK INCLUDED: | NO |
| CABLE LENGTH: | 15 FT. (NOT INCLUDED) |
| REMOTE INCLUDED: | NO |
| BRAKE TYPE: | DRUM |
| HANDLE TYPE: | 7 IN. OFFSET |
| MOUNTING BOLT PATTERN LENGTH: | 2.79 IN. |
| MOUNTING BOLT PATTERN WIDTH: | 2.52 IN. |
| RATED LINE PULL: | 900 LBS. |
| GEAR MATERIAL: | STEEL |
| MATERIAL: | STEEL |
| FREE SPOOLING: | YES |
| D SHACKLE INCLUDED: | NO |
| POWER OUT: | NO |
| HARDWARE INCLUDED: | NO |
| TREE SAVER: | NO |
| FRAME MATERIAL: | STEEL |
| COLOR: | ZINC |
Fulton has produced marine and utility trailer hardware for more than a century, and its jacks, winches and couplers are a standard for light and medium-duty trailering. The XLT and F2 series cover swivel and fixed jacks, hand and powered winches from 1,500 to 3,200 pounds, and couplers built to keep working in wet, salty conditions.
With more than a hundred years of production behind it, Fulton has become the reference point for light and medium-duty trailer hardware, particularly on the marine side. That environment is the toughest test a trailer component faces. A boat trailer is reversed into fresh or salt water on every launch and left to sit wet, which finds every weakness in plating, sealing and material choice. Fulton's stated position is that the brand performs best when the weather is at its worst, and its product engineering reflects that. It sits within the Horizon Global towing group alongside Reese, Draw-Tite, Bulldog, Tekonsha and Wesbar.
Marine and utility jacks anchor the line. The XLT Series marine jack uses a bolt-through swivel mount built from three-dimensionally formed heavy-gauge steel stampings with a proprietary bushing material, a combination chosen to minimise deflection under tongue load while keeping the swivel action working after years of exposure. The F2 Series takes corrosion resistance further as the industry's only extruded aluminium marine jack with an anodised finish, which removes the rust problem at its source rather than coating over it. The wider trailer jack range covers topwind, sidewind and drop-leg configurations.
Trailer winches pull boats onto bunks and rollers. XLT Series winches use efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings and a Comfort Grip handle that makes the last few turns under load bearable, in 1,500 and 1,800 pound capacities. F2 Series winches use an enclosed frame for a cleaner look and added protection, in 1,600, 2,000 and 3,200 pound models, including two-speed options that trade line speed for cranking effort.
Couplers complete the range, including A-frame couplers matched to common tongue sizes and load ratings, serving boat owners, utility trailer users and trailer manufacturers.
Experts available to answer your questions
Call 888-634-94945 Years
The product model number is F3295, revision Rev-J 6525, dated 12/16.
Cequent Performance Products provides a limited five-year warranty covering material and workmanship defects, excluding normal wear and tear. The warranty applies only to the original consumer purchaser and requires installation and use according to product instructions. Warranty does not cover damage from abuse, neglect, misuse, accidents, misapplication, overloading, improper installation, improper maintenance, or product alterations not made by the manufacturer. If the product fails to comply, the sole remedy is replacement without charge or refund of purchase price at the manufacturer's option. This warranty is not transferable.
This winch accommodates three types of line: rope (textile), strap, or steel cable. Not all winch models support all line types. Rope requires no bolts or clamps and weaves through the drum outer wall. Strap uses a cross bolt through drum holes. Steel cable is only compatible with winches having a hub diameter of 1¾" or larger. Consult the Winch Information Chart to confirm which line types your specific capacity model supports.
No. Only winches with a hub diameter of 1¾" or larger can accommodate steel cable. Winches designed for steel cable have a larger drum hub to reduce bending fatigue and extend cable life. Check the Winch Information Chart for your capacity to confirm steel cable compatibility. If your model shows "N/A" under the Steel Cable column, that model does not support steel cable.
Winch capacities range from 900 lbs to 3700 lbs depending on model. Single-speed models are available in 900, 1100, 1300, 1500, 1800, 2600, and 3200 lbs. Two-speed models are available in 2000, 2600, 3200, and 3700 lbs. Capacity is based on direct line pull on the first layer of line on the drum and is reduced as line builds up on the drum. Refer to the Winch Information Chart for your specific model. Never exceed the maximum rated capacity stamped or decaled on the product.
Three 3/8" diameter grade-5 bolts are required for mounting. Mounting bolts vary in length for each application, so you must determine the correct length for your specific installation. The bolts are not supplied with the winch. The winch stand or frame must be capable of supporting at least five times the rated capacity of the winch, and the mounting surface must be equal to or greater than the footprint of the winch frame.
A grade-5 bolt of the largest possible diameter is required for strap mounting. The specific bolt size depends on your winch capacity. Refer to the Winch Information Chart under "Strap Bolt Size" for your model. For example, 900–1500 lbs models use M6 x 65mm (metric) or 1/4" x 2-3/4" (standard); 1800 lbs and larger models use M8 x 66mm (metric) or 5/16" x 2-3/4" (standard); 2000 lbs and larger two-speed models use 3/8" x 2-3/4" (standard).
The manual does not explicitly state whether a handle is included. However, the manual provides instructions for assembling a handle onto the input shaft, suggesting it may be supplied separately or as an optional component. Contact Cequent Performance Products at 1-800-632-3290 to confirm whether a handle is included with your purchase.
The mounting surface must be equal to or greater than the footprint of the winch frame. The winch stand or frame must be capable of supporting at least five times the rated capacity of the winch.
Attaching a rope requires no bolts, nuts, or clamps. The rope must weave through the drum outer wall and be secured beneath itself, as shown in the illustration. Always maintain a minimum of three complete wraps of rope on the drum.
Winches designed for strap have holes in the drums to accommodate a strap cross bolt. Insert a grade-5 bolt of the largest possible diameter (see the Winch Information Chart for your model) through the drum holes. Tighten the locknut just until end play in the bolt is taken up. For winches with a strap anchor included, pass the strap loop under the cross bolt, insert the strap anchor in the strap loop, then pull tight. Always maintain a minimum of three complete wraps or layers of strap on the drum.
Pass the cable from the inside of the drum through one of the dimpled holes in the outer plate. Loop the cable around the drum bearing, under itself, and leave 1" of cable extending past the clamp location. Tighten the clamp nuts to approximately 2 ft-lbs. Always maintain a minimum of three complete wraps of cable on the drum. Neatly wrap the cable to reduce the chance of kinking or fraying.
Assemble the handle onto the flatted input shaft end. Tighten the 1/2" - 13 locknut against the handle and torque to 22-25 ft-lbs. Do not over-torque.
Use three 3/8" diameter grade-5 bolts and torque them to 28-30 ft-lbs. Mounting bolts vary in length for each application, so determine the correct length for your installation. The winch stand must be capable of supporting at least five times the rated capacity of the winch. The mounting surface must be equal to or greater than the footprint of the winch frame. After installation, check that the winch is secure to the mounting structure.
Remove the drum bolt and gently separate the plastic cover to allow the winch drum to be removed. Install the strap according to the standard strap attachment instructions, then re-install the winch drum as it was before.
Torque the 1/2" - 13 locknut against the handle to 22-25 ft-lbs. Do not over-torque.
Torque the three 3/8" diameter grade-5 mounting bolts to 28-30 ft-lbs.
On single-speed winches, torque the drum locknut to 9-10 ft-lbs. Tighten just until end play in the bolt is taken up. Over-tightening can deform the drum.
On two-speed winches, torque the drum locknut to 24 ft-lbs. Be sure not to over-tighten, as this may crush the spacer between the frame and keep the drum from turning.
Tighten the clamp nuts to approximately 2 ft-lbs.
Drum hub diameter varies by model. Single-speed models: 900–1500 lbs have 7" hubs; 1800 lbs has 8" hub; 2600 and 3200 lbs have 10" hubs. Two-speed models: 2000 lbs has 10" hub; 2600 and 3200 lbs have 10" hubs; 3700 lbs has 10" hub. Refer to the Winch Information Chart for your specific model.
Handle length varies by model. Single-speed models: 900–1500 lbs have 7" handles; 1800 lbs has 8" handle; 2600 and 3200 lbs have 10" handles. Two-speed models: 2000 lbs has 10" handle; 2600 and 3200 lbs have 10" handles; 3700 lbs has 10" handle. Refer to the Winch Information Chart for your specific model.
Gear ratios vary by model and speed. Single-speed models range from 3.25:1 to 4.1:1. Two-speed models have dual ratios such as 4.1:1 & 9.8:1 or 5.1:1 & 12.2:1. Refer to the Winch Information Chart for your specific model.
Drum storage capacity varies by model and line type. For example, the 900 lbs model stores 36' x 1/4" rope or 15' x 2" strap. The 3700 lbs two-speed model stores 185' x 7/32" steel cable only. Refer to the Winch Information Chart for your specific model. Capacity is based on direct line pull on the first layer of line on the drum and is reduced as line builds up on the drum.
Winches require a maximum of 45 lbs of handle force to pull their rated load. If you cannot crank the winch with one hand, you are potentially overloading the winch. Excessive force in turning the winch handle may indicate overload.
Always maintain a minimum of three complete wraps of rope, strap, or cable on the drum. This applies to all line types.
Never position any part of your body under the winch or the load being supported. Never stand alongside the winch cable, strap, or rope, and do not guide the line with your hands. Do not operate with slippery, wet, or oily hands; always maintain a firm grip on the winch handle. Do not attempt to stop a winch by grabbing the handle while in motion. Never release the crank handle unless the ratchet pawl is fully engaged and the load is supported. Never leave a weight supported from the winch while unattended. Do not allow children to play on or around the winch or load. Do not use the winch to move humans.
A loud clicking sound from the ratchet must be heard when lifting the load. If a loud clicking sound is not heard, do not use the winch and replace the ratchet components immediately.
Assure there is an adequate safety factor of at least 3 times the maximum load for all components used.
No. Winches are not designed to secure boats to trailers while towing. Boat tie-downs should be used for this purpose.
Before use, perform the following: 1) Inspect rope, strap, or cable and replace if damaged. 2) Check mounting hardware for proper tightness and tighten if necessary. 3) Apply a drop or two of #30 weight engine oil to each bushing I.D. and to the ratchet pawl pivot points. Maintain a thin layer of chassis grease on the gear teeth.
Check the final installation and make sure the winch is secure to the mounting structure. Verify that all three 3/8" diameter grade-5 mounting bolts are torqued to 28-30 ft-lbs.
Apply a drop or two of #30 weight engine oil to each bushing I.D. and to the ratchet pawl pivot points. Maintain a thin layer of chassis grease on the gear teeth. Periodically check mounting hardware for proper torque and tighten if necessary. Always inspect the cable, strap, or rope and its attachment before each use to ensure they are not damaged. Never use them if they are worn, kinked, or frayed. Always replace bent, broken, or worn parts before using the product.
Periodically check mounting hardware for proper torque and tighten if necessary. The manual does not specify an exact interval, but regular inspection is recommended.
Apply #30 weight engine oil to each bushing I.D. and to the ratchet pawl pivot points. Maintain a thin layer of chassis grease on the gear teeth.
This manual covers manual trailer winches in capacities from 900 to 3700 lbs. Confirm your winch capacity matches your trailer's requirements. The winch stand must support at least 5 times the rated capacity, and the mounting surface must equal or exceed the winch frame footprint.
You need three 3/8" diameter grade-5 bolts. Bolt length varies by application. Mounting hardware is not supplied with the winch.
The manual does not mention drilling. Installation uses three pre-existing or provided mounting holes on the winch stand/frame.
Torque the three 3/8" diameter grade-5 mounting bolts to 28-30 ft-lbs.
Never exceed the maximum rated capacity stamped or decaled on your specific winch. Capacities range from 900 to 3700 lbs depending on model. Refer to the Winch Information Chart or contact Cequent Performance Products at 1-800-632-3290 if uncertain.
Apply #30 weight engine oil to bushings and ratchet pawl pivot points, and maintain chassis grease on gear teeth. Inspect rope, strap, or cable before each use. Periodically check mounting hardware torque. Replace bent, broken, or worn parts before use.
A loud clicking sound from the ratchet must be heard when lifting the load. If a loud clicking sound is not heard, do not use the winch and replace the ratchet components immediately. Contact Cequent Performance Products at 1-800-632-3290 for replacement parts.
If you cannot crank the winch with one hand, you are potentially overloading the winch. Excessive force in turning the winch handle may indicate overload. Winches require a maximum of 45 lbs of handle force to pull their rated load. Reduce the load or verify you are not exceeding the winch's maximum rated capacity.
No. Never use rope, strap, or cable if they are worn, kinked, or frayed. Always inspect the cable or strap and its attachment before each use to make sure they are not damaged. If the cable or attachment breaks, the cable will whip violently, causing property damage, serious bodily injury, and/or death. Replace the damaged line immediately.
Over-tightening the strap bolt locknut can deform the drum or crush the spacer between the frame, preventing the drum from turning. On single-speed winches, torque the drum locknut to 9-10 ft-lbs only. On two-speed winches, torque to 24 ft-lbs. Tighten just until end play in the bolt is taken up. If the drum is already stuck, loosen the locknut slightly and verify the spacer is not crushed.
Check that all three 3/8" diameter grade-5 mounting bolts are present and torqued to 28-30 ft-lbs. Verify the mounting surface is equal to or greater than the footprint of the winch frame. Verify the winch stand is capable of supporting at least five times the rated capacity of the winch. Tighten any loose bolts to the specified torque.
Ann
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
| Part Number | Capacity (lbs.) | Handle Length (in.) | Max Mechanical Advance* | Rope (ft. x in.) | Strap (ft. x in.) | Recommended Strap Bolt Sizes (in.) | Strap Included | Finish |
|---|---|---|---|---|---|---|---|---|
| 142001 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142002 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142003 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142006 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142007 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142026 | 1,100 | 7.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Glossy Black |
| 142101 | 1,100 | 8.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142102 | 1,100 | 8.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142103 | 1,300 | 8.00 | 49:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142104 | 1,300 | 8.00 | 49:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142200 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142201 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142203 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142204 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142208 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Glossy Black |
| 142226 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142300 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142303 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142306 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142326 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
