Fulton Trailer Winch, Single-Speed, 1,800 lbs. Capacity, 20 ft. Strap FL142326Fulton$140.91Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Fulton
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Fulton single speed winches are designed to meet your toughest pulling demands. Featuring solid drum gear construction, factory-lubricated drive systems, and industry-leading Z-MAX 600 high performance zinc finish.
| BRAND: | FULTON |
| PART NUMBER: | 142306 |
| WARRANTY: | LIMITED 5 YEAR WARRANTY |
| WEIGHT: | 9.993 LBS |
| CAPACITY: | 1,800 LBS. |
| UNIVERSAL OR SPECIFIC FIT: | UNIVERSAL |
| TYPE: | RATCHET |
| WATERPROOF: | YES |
| HOOK INCLUDED: | YES |
| HOOK TYPE: | CLEVIS SAFETY HOOK |
| CABLE LENGTH: | 20 FT. |
| GEAR RATIO: | 5.1:1 |
| RATED LINE PULL: | 1,800 LBS. |
| MATERIAL: | STEEL |
| NUMBER OF STRAPS: | 1 |
| FREE SPOOLING: | YES |
| HARDWARE INCLUDED: | YES |
| TREE SAVER: | NO |
| FRAME MATERIAL: | STEEL |
| COLOR: | SILVER |
Fulton has produced marine and utility trailer hardware for more than a century, and its jacks, winches and couplers are a standard for light and medium-duty trailering. The XLT and F2 series cover swivel and fixed jacks, hand and powered winches from 1,500 to 3,200 pounds, and couplers built to keep working in wet, salty conditions.
With more than a hundred years of production behind it, Fulton has become the reference point for light and medium-duty trailer hardware, particularly on the marine side. That environment is the toughest test a trailer component faces. A boat trailer is reversed into fresh or salt water on every launch and left to sit wet, which finds every weakness in plating, sealing and material choice. Fulton's stated position is that the brand performs best when the weather is at its worst, and its product engineering reflects that. It sits within the Horizon Global towing group alongside Reese, Draw-Tite, Bulldog, Tekonsha and Wesbar.
Marine and utility jacks anchor the line. The XLT Series marine jack uses a bolt-through swivel mount built from three-dimensionally formed heavy-gauge steel stampings with a proprietary bushing material, a combination chosen to minimise deflection under tongue load while keeping the swivel action working after years of exposure. The F2 Series takes corrosion resistance further as the industry's only extruded aluminium marine jack with an anodised finish, which removes the rust problem at its source rather than coating over it. The wider trailer jack range covers topwind, sidewind and drop-leg configurations.
Trailer winches pull boats onto bunks and rollers. XLT Series winches use efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings and a Comfort Grip handle that makes the last few turns under load bearable, in 1,500 and 1,800 pound capacities. F2 Series winches use an enclosed frame for a cleaner look and added protection, in 1,600, 2,000 and 3,200 pound models, including two-speed options that trade line speed for cranking effort.
Couplers complete the range, including A-frame couplers matched to common tongue sizes and load ratings, serving boat owners, utility trailer users and trailer manufacturers.
Experts available to answer your questions
Call 888-634-94945 Years
Cequent trailer winches are available in capacities ranging from 900 lbs to 3700 lbs. The specific capacity depends on the model. Always refer to the stamped markings or decals on your winch to determine its rated capacity. If uncertain, contact Cequent Performance Products at 1-800-632-3290 or www.cequentgroup.com.
Cequent trailer winches are designed for manual operation only. The load rating is based on an intermittent duty cycle. The winch requires a maximum of 45 lbs of handle force to pull the rated load. If you cannot crank the winch with one hand, you are potentially overloading it.
No. Only winches with a hub diameter of 1 3/4" can accommodate steel cable. Winches designed for steel cable have a larger drum hub to reduce bending fatigue and extend cable life. Check the Winch Information Chart to confirm your model supports steel cable before purchasing or using steel cable.
Cequent trailer winches can accommodate rope, strap, or steel cable, depending on the model. Rope requires no bolts or clamps and is secured by weaving through the drum outer wall. Strap uses a cross bolt through holes in the drum. Steel cable is only compatible with winches having a 1 3/4" hub diameter and is secured with a clamp. Always maintain a minimum of three complete wraps of your chosen line on the drum.
The winch itself is supplied with the drum, handle, ratchet pawl, and other internal components. However, mounting hardware is not supplied. You must provide three 3/8" diameter grade-5 bolts to mount the winch to your stand or frame. The length of mounting bolts varies by application. If your winch uses a strap, you will need a grade-5 bolt of the largest possible diameter for the cross bolt, as specified in the Winch Information Chart for your capacity.
The strap bolt size depends on your winch capacity. Refer to the Winch Information Chart on page 2 for your specific model. For example, 900-1500 lbs winches use M8 x 66mm (metric) or 5/16" x 2-3/4" (standard) grade-5 bolts, while 2000 lbs and larger winches use 3/8" x 2-3/4" grade-5 bolts. Always use a grade-5 bolt of the largest possible diameter for your model.
Before installation, inspect the rope, strap or cable and replace if damaged. Check that the mounting stand is capable of supporting at least five times the rated capacity of the winch. Verify that the mounting surface is equal to or greater than the footprint of the winch frame. Ensure you have three 3/8" diameter grade-5 bolts for mounting. Check that mounting bolts are the correct length for your application.
Assemble the handle onto the flatted input shaft end. Tighten the 1/2" - 13 locknut against the handle and torque to 22-25 ft-lbs. Do not over-torque the locknut.
Attaching a rope requires no bolts, nuts or clamps. The rope must weave through the drum outer wall and be secured beneath itself, as shown in the manual illustration. Always maintain a minimum of three complete wraps of rope on the drum.
Winches designed for strap have holes in the drum to accommodate a strap cross bolt. Insert a grade-5 bolt of the largest possible diameter (see the Winch Information Chart for your capacity) through the drum holes. Tighten the locknut just until end play in the bolt is taken up. For winches with a strap anchor included, pass the strap loop under the cross bolt, insert the strap anchor in the strap loop, then pull tight. Do not over-tighten, as this can deform the drum.
If attaching a strap without a strap anchor to a plastic-covered winch, remove the drum bolt and gently separate the plastic cover to allow the winch drum to be removed. Install the strap according to the standard strap attachment instructions, then re-install the winch drum as it was before.
Pass the cable from the inside of the drum through one of the dimpled holes in the outer plate. Loop the cable around the drum bearing, under itself, and leave 1" of cable extending past the clamp location. Tighten the clamp nuts to approximately 2 ft-lbs. Neatly wrap the cable to reduce the chance of kinking or fraying.
When attaching the winch to the mounting stand, use three 3/8" diameter grade-5 bolts and torque to 28-30 ft-lbs. Mounting bolt lengths vary by application, so check the final installation to ensure the winch is secure to the mounting structure.
Tighten the 1/2" - 13 handle locknut to 22-25 ft-lbs. Do not over-torque.
On single-speed winches, torque the drum locknut to 9-10 ft-lbs. Do not over-tighten, as this may crush the spacer between the frame and prevent the drum from turning.
On two-speed winches, torque the drum locknut to 24 ft-lbs. Do not over-tighten, as this may crush the spacer between the frame and prevent the drum from turning.
Tighten the clamp nuts for steel cable to approximately 2 ft-lbs.
Always maintain a minimum of three complete wraps of cable, rope or strap on the drum. This is a critical safety requirement. Never allow the line to unwind completely from the drum.
A loud clicking sound from the ratchet must be heard when lifting the load. This indicates the ratchet pawl is properly engaged. If a loud clicking sound is not heard, do not use the winch and replace the ratchet components immediately.
Winches require a maximum of 45 lbs of handle force to pull their rated load. If you cannot crank the winch with one hand, you are potentially overloading the winch. Excessive force in turning the winch handle may indicate overload.
No. Winches are not designed to secure boats to trailers while towing. Boat tie-downs should be used for this purpose.
Assure there is adequate safety factor of at least 3 times the maximum load for all components used. This applies to the winch, mounting stand, bolts, cable, strap, rope and any other components in the system.
After installation, check the final installation and make sure the winch is secure to the mounting structure. Verify that all three mounting bolts are torqued to 28-30 ft-lbs. Inspect the rope, strap or cable and replace if damaged. Check mounting hardware for proper tightness.
Before each use, inspect the rope, strap or cable and replace if damaged. Check mounting hardware for proper tightness and tighten if necessary. Apply a drop or two of #30 weight engine oil to each bushing I.D. and to the ratchet pawl pivot points. Maintain a thin layer of chassis grease on the gear teeth. Periodically check mounting hardware for proper torque and tighten if necessary. Always replace bent, broken or worn parts before using the product.
Apply a drop or two of #30 weight engine oil to each bushing I.D. and to the ratchet pawl pivot points. Maintain a thin layer of chassis grease on the gear teeth.
Periodically check mounting hardware for proper torque and tighten if necessary. The manual does not specify an exact interval, but regular inspection before use is recommended.
Only if your model has a 1 3/4" hub diameter. Check the Winch Information Chart or contact Cequent at 1-800-632-3290 to confirm.
Three 3/8" diameter grade-5 bolts. Length varies by application. Mounting hardware is not supplied with the winch.
The manual does not address drilling. Installation depends on your mounting stand or frame design. Consult your stand manufacturer or installer.
Torque the three 3/8" grade-5 mounting bolts to 28-30 ft-lbs.
Always maintain at least three complete wraps of cable, rope or strap on the drum.
#30 weight engine oil. Apply drops to each bushing I.D. and ratchet pawl pivot points. Maintain chassis grease on gear teeth.
Do not use the winch. A loud clicking sound from the ratchet must be heard when lifting the load. If a loud clicking sound is not heard, replace the ratchet components immediately. Contact Cequent Performance Products at 1-800-632-3290 for replacement parts.
Excessive force in turning the winch handle may indicate overload. Winches require a maximum of 45 lbs of handle force to pull their rated load. If you cannot crank the winch with one hand, you are potentially overloading the winch. Reduce the load or verify you are not exceeding the winch's rated capacity.
The drum locknut may be over-tightened. On single-speed winches, the drum locknut should be torqued to 9-10 ft-lbs only. On two-speed winches, torque to 24 ft-lbs. Over-tightening can crush the spacer between the frame and prevent the drum from turning. Loosen the locknut to the correct torque specification.
No. Never use cable, strap or rope if they are worn, kinked or frayed. If the cable or attachment breaks, the cable will whip violently, causing property damage, serious bodily injury and/or death. Always inspect the cable or strap and its attachment before each use. Replace damaged cable immediately.
Verify that the ratchet pawl is fully engaged and holding the load. If you must stop before the load is fully in or out, ensure the ratchet pawl is engaged and gradually release the winch handle to confirm the ratchet pawl is holding the load. If the ratchet pawl is not engaging properly, do not use the winch and replace the ratchet components immediately.
On Sale Today
Original price was $100.00. Current price is $75.74.
Ann
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
| Part Number | Capacity (lbs.) | Handle Length (in.) | Max Mechanical Advance* | Rope (ft. x in.) | Strap (ft. x in.) | Recommended Strap Bolt Sizes (in.) | Strap Included | Finish |
|---|---|---|---|---|---|---|---|---|
| 142001 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142002 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142003 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142006 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142007 | 900 | 7.00 | 39:1 | 36 x 1/4 | 15 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142026 | 1,100 | 7.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Glossy Black |
| 142101 | 1,100 | 8.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142102 | 1,100 | 8.00 | 43:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142103 | 1,300 | 8.00 | 49:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142104 | 1,300 | 8.00 | 49:1 | 30 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142200 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142201 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142203 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | Yes | Clear Zinc |
| 142204 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Clear Zinc |
| 142208 | 1,500 | 8.00 | 49:1 | 20 x 5/16 | 20 x 2 | 1/4 x 2-1/2 Grade 5 | No | Glossy Black |
| 142226 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142300 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142303 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142306 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
| 142326 | 1,800 | 8.00 | 62:1 | 20 x 7/16 | 20 x 2 | 3/8 x 2-3/4 Grade 5 | No | Clear Zinc |
You save $24.26 (24%)
Free Shipping
Ships free on all orders
Authorized DealerFREE ShippingFREE SHIPPING
Estimated delivery Tue, Aug 11 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout